next year, the global LED lighting market penetration will exceed 10%

Posted on February 22, 2012 by admin

Web Design And Seo For www.china-webdesign.com
led garden lighting – China Manufacturer
Thank you for inquiry my led garden lighting, Tel:+86-574-87641051 E-MAIL:sales@everlightings.com
http://www.everlites.com/key-led-garden-lighting-30/

   Zhongzheng Wang News Market participants pointed out, following the LED TV, LED lighting will become a fast-growing applications to drive the LED industry. DIGITIMES Research the latest statistics, the size of the high-brightness LED market will be $ 8.25 billion in 2010, growing to $ 12.6 billion in 2011, the annual growth rate of up to 53%, which, LED lighting, the number of pieces from 4.8 billion in 2010, will $ 12.4 billion in 2011, mainly because of the 2011 LED bulbs to replace the traditional incandescent began to show effects.

DIGITIMES Research, the 2010 LED lighting of the total lighting market share is not high, only 3.2% of the to the output value point of view, but in rising awareness of carbon reduction, the major countries in the world has set the LED lighting policy to actively promote the LED lighting industry developments. DIGITIMES Research analysis of the global demand for LED bulbs will be 596 million in 2011, substantial growth to 2.5 billion in 2013; street lights, due to the major cities of mainland China, the United States, Europe and other countries to promote the demonstration project is estimated that LED street lights will be 2.2 million in 2011 to $ 9.8 million in 2013, thereby bringing about the next few years, LED lighting penetration upgrade.

DIGITIMES Research believes that in the world\\ s major countries in LED lighting policy to promote the LED luminous efficiency is significantly improved, and estimated the prices of LED lighting every year there will be 20 to 30 percent fell under the influence of DIGITIMES Research, forecast lighting demand for LED 2009 2013 CAGR to reach 97.4 percent, higher than that of large-size LCD with LED backlight CAGR 62.6%, and the LED lighting market size As for 2011 will reach $ 15.4 billion, the overall lighting market penetration for the first time exceeded 10 percent, reaching 10.6% .

Posted in Uncategorized | Tagged , , | Comments Off

Shanghai opened

Posted on February 22, 2012 by admin

Web Design And Seo For www.china-webdesign.com
swirl diffusers – China Manufacturer
Thank you for inquiry my swirl diffusers, Tel: +86-512-68188280, Email: factory@found-hvac.com
http://www.foundation-hvac.com/key-swirl-diffuser-689/

    Background: May 26, 2010, the domestic industry event in Shanghai – International Kitchen & Bath Show was once again opened over 2000 kitchen companies once again debut. The size of the full 24 pavilion seems to be confirmed with the economic environment is steadily recovering. Property market, on the other hand, policies for kitchen and bath industry, blowing a new wind to the southwest drought accelerate the water-saving pulse again, the Expo convene people to enjoy the visual feast, the environmental water around the corner, a lot of background, kitchen and bath business What are trends? Exhibition build-up under the international brands, Guangdong, Fujian, Zhejiang Department of kitchen companies turn to interpretation of what the general style? Flowers in full bloom behind, hide the mystery of what kind of business? The property market under the New Deal, such as He Guanzheng act?

    Following the three Furniture Fair 2010, Guangdong, Shanghai floor exhibition, home network to play again National UMPAY, build-up to one hundred reporters in Beijing, Shanghai, Guangzhou, Shenzhen, Tianjin, Hangzhou, Chengdu and other composition of the scale reported group, a strong attack Shanghai International Kitchen The Methodist Show.

Posted in Uncategorized | Tagged , , | Comments Off

Vibration fluidized bed dryer

Posted on February 22, 2012 by admin

Web Design And Seo For www.china-webdesign.com
Concrete Brick Making Machine – China Manufacturer
Thank you for inquiry my Concrete Brick Making Machine, Tel:86-0371-63431169 E-MAIL:sales@machinezy.com
http://www.crusherzy.com/key-Concrete-Brick-Making-Machine-129/

The particulate material in the ordinary fluidized bed dryer for drying, the material particles should be uniform and

Certain specifications, or the formation of the groove-like flow and stagnation of the area, particle size distribution width, the folder

With serious caking humidity, as well as due to particle backmixing, particle residence time distribution

Range particles uneven moisture content, thus limiting the use of fluidized bed dryer Fan

Wai. In order to overcome its shortcomings, foreign improve fluidized bed dryer performance and other aspects of

The amount of research. Strengthen the process of heat and mass transfer in the energy crisis, energy conservation,

Improve the quality of the fluidized bed dryer with a wide range of adaptability and economic rationality,

Vibration fluidized bed dryer is of great significance. Vibration fluidized bed dryer design of advanced,

Reliable quality, wide range of applications, and significant energy saving and can dry in the other dry

The advantages of the machine difficult to dry materials, vibration fluidized bed dryer various industries

Generally welcomed.

Principle and structure of the vibration fluidized bed dryer
Vibration fluidized bed dryer machine vibration exciting force generated by the vibration motor, the material in this

Jump forward role to set the direction of the exciting force, vibration fluidized bed drying machine at the end

Hot air so that the material in a fluidized state full access to the material particles and hot air, thus

Achieve

Posted in Uncategorized | Tagged , , | Comments Off

carbon steel electrode type specifier

Posted on February 22, 2012 by admin

Web Design And Seo For www.china-webdesign.com
Nickel Welding Rod – China Manufacturer
Thank you for inquiry my Nickel Welding Rod, TEL:0086-571-63725979, EMAIL:china@hzdayang.cn
http://www.hzdayang.com/key-nickel-welding-rod-15/

   The carbon steel electrode, the deposited metal tensile strength less than 600Mpa (ie, 60kgf/mm) applies to carbon steel and low-strength low-alloy

steel welding.
   When you choose electrode, usually based on the chemical composition of steel, mechanical properties, crack resistance requirements, must also

take into account the shape of the welded structure, working conditions, by force status and welding equipment performance, and comprehensive

consideration. When necessary, to carry out the welding test to determine the process measures, and then determine the choice of electrode.

Usually requires plasticity, impact toughness, crack resistance, the choice of low-hydrogen electrodes. The welding position, special requirements may

use a dedicated electrode, iron powder electrode can be used to improve the welding efficiency.

   Instructions in the welding current is a reference value, workpiece, such as warm-up than normal current of 5 to 15% less than AC DC can be

reduced about 10%, vertical welding and overhead welding flat welding small 10 ~~ about 15%.
   Low hydrogen iron powder type electrode, Welding electrodes must be above 350 ℃ baking as possible, as baking, bake the number of the

principle of how much. Otherwise it will result in the deterioration of weld defects (pores, slag inclusions, cracks, process performance, etc.). Cellulose

type electrode, the baking temperature should be specified in strict accordance with the instructions for baking temperature is too high, and go to

the drug leather fiber, destruction inherent in the electrode process performance.
   Using low hydrogen electrodes, the welder should be living in the upwind position, to enhance ventilation, to prevent the hazards of welding fumes

on the body.
   Low hydrogen type electrode baking the number of times as much as possible not more than twice to prevent drug skin to become brittle and fall

off.

Posted in Uncategorized | Tagged , , | Comments Off

valve surfacing electrode classification purposes and instructions for use

Posted on February 22, 2012 by admin

Web Design And Seo For www.china-webdesign.com
Copper Brazing Alloys – China Manufacturer
Thank you for inquiry my Copper Brazing Alloys, TEL:0086-571-63725979, EMAIL:china@hzdayang.cn
http://www.hzdayang.com/key-copper-brazing-alloys-26/

Description: The D502 is titanium calcium type skin the 1Cr13 type valve surfacing electrode can be AC ​​and DC welding process. Surfacing metal for

the 1Cr13 half ferritic high-chromium steel. Surfacing layer has the characteristics of air quenching, generally not to be heat-treated, uniform hardness

and softening can also be annealed in the 750-800 ° C, when heated to 900-1000 ° C air-cooled or oil quenched, and the re-hardening.

Uses: This is a versatile surfacing electrode for surfacing operating temperature below 450 ℃ carbon steel or alloy shafts and valves.

D507 valve surfacing welding rod in line with GBEDCr-A1-15

Description: The D507 is a low hydrogen sodium type coating the 1Cr13 valve surfacing welding rod, using DCRP. Surfacing metal for the 1Cr13 half

ferritic high-chromium steel. Surfacing layer has the characteristics of air quenching, generally not to be heat-treated, uniform hardness and softening

can also be annealed in the 750-800 ° C, when heated to 900-1000 ° C air-cooled or oil quenched, and the re-hardening.

Uses: This is a versatile surfacing electrode for surfacing operating temperature below 450 ℃ carbon steel or alloy shafts and valves.

D507Mo valve surfacing welding rod in line with GBEDCr-A2-15

Description: The D507Mo the 1Cr13 valve low hydrogen sodium type coating surfacing electrode. Surfacing metal for the 1Cr13 half ferritic high-

chromium steel. Surfacing layer with air quenching characteristics of the deposited metals with high temperature hardness, good thermal stability,

erosion resistance. D577 electrode used in conjunction with good anti-abrasion performance. Surfacing process is simple, no preheating before welding

without heat treatment after welding using DCRP.

Purposes: to surfacing operating temperature below 510 ℃ temperature and high pressure cut-off valve sealing surface. Gate valve sealing surface

should be of the electrodes and the D577 electrode used in conjunction with (valve seat and disc, respectively, with more than two electrodes).

D507MoNb valve surfacing welding rod in accordance with GBEDCr-A1-15

Description: D507MoNb low hydrogen sodium type coating the 1Cr13 type valve welding electrodes, the use of DCRP, drug skin by adding the

appropriate amount of Mo, Nb strengthened and stable element, it is surfacing metal has good resistance to oxidation and anti-crack performance.

Uses: used for the operating temperature below 450 ℃, the low pressure valve sealing surface of the surfacing.

D512 valve surfacing electrode comply with GBEDCr-B-03

Description: The D512 is titanium calcium type skin the 2Cr13 type valve surfacing electrode, AC and DC welding process. Surfacing metal 2Cr13

martensitic high chromium steel. Surfacing layer has the characteristics of air quenching, generally without heat treatment, uniform hardness, softening

annealing in the 750-800 ° C, when heated to 950-1000 ° C air-cooled or oil quenching can be re-hardened.

Purposes: D512 is a versatile surfacing welding rods, welding layer than the D502 is harder and more wear-resistant, difficult to process for surfacing

carbon steel or low alloy steel shaft, superheated steam valves, mixer paddle, screw conveyor blades.

D516MA valve surfacing electrode comply with GBEDCrMn-A-16

Description: D516MA the low hydrogen potassium type coating of chromium-manganese steel surfacing electrode deposited metal has good abrasion

resistance, heat resistance, corrosion resistance and thermal crack performance, welding technology, welding without preheating, without heat

treatment after welding, surfacing layer for cutting.

Posted in Uncategorized | Tagged , , | Comments Off

extruder, plastic machinery material market situation

Posted on February 22, 2012 by admin

Web Design And Seo For www.china-webdesign.com
zipper attachment machine – China Manufacturer
Thank you for inquiry my zipper attachment machine, Tel:+86-0577-65622138, Email:xinxin@xinxinpack.com
http://www.bagsmakingmachine.com/

The degree of perfection of the extruder and other plastics machinery directly affect the quality, yield and cost of plastic semi

-finished products, and therefore must be able to adapt to the plastic with a mixed process of temperature and stress changes, and

the resulting molten material properties change, and adapt to the special conditions of chemical corrosion and mechanical wear. In

recent years, a special plastic grades, the development of engineering plastics, composite materials, the development of large,

lightweight, and thin-walled plastic product structure requirements such as extruder plastic machinery to achieve: for product

production purposes sets of ; high-speed, effort, and automation to improve the production efficiency of products; to ensure a

minimum level of sophistication of the product specifications and quality of error; low energy consumption, covering small, the

operation and maintenance is easy and safe.

    Extruder Plastic Machinery, the following four aspects:
1, is the industry heterozygosity is low, the irrational distribution of enterprises;
2 is a backward layout, the grade is not high,
3 is a low level of production skills to open up skills are not strong, there is no formation of the skills of independent

intellectual property rights to open up the system;
4, is to apply a lower level of business efficiency is poor.

    The plastic products industry, how to innovate to respond to the situation in the WTO? As follows:
1, is to speed up corporate restructuring and the pace of production would heterozygosity, low cost, and improve their

competitiveness. Enhance wind skills.
2, is focusing on the variety, shield capacity, efficiency, and expand exports, actively promote the reform of business skills.

Must aim at the international the ancestors level, to accept the ancestors skill, and to further intensify mediation efforts,

optimized varieties layout, as soon as possible to improve the production of wind-induced and grades to better adapt to market

demand.
3, international aid, conduct a variety of situations to further expand the application range with foreign. China s petrochemical

industry, light, building materials, plastic pipe fittings and other large and medium-sized enterprises and multinational

companies abroad to further help solve the problem, and actively promote the introduction of foreign funds, our ancestors skills

and apply experience, improve business skills, and apply gentle water and economic benefits.

Posted in Uncategorized | Tagged , | Comments Off

high-power LED cooling solution?

Posted on February 17, 2012 by admin

Web Design And Seo For www.china-webdesign.com
underwater led lights – China Manufacturer
Thank you for inquiry my underwater led lights, Tel:+86-574-87641051 E-MAIL:sales@everlightings.com
http://www.everlites.com/led-underwater-lights/

As electronic devices continue to be more powerful features integrated into more group, the temperature control has become one of

the crucial challenges in the design, architecture crunch, the operating space is getting smaller and smaller, how to effectively

take away heat generated by the greater unit power? As electronic devices continue to the more powerful features integrated into

more group, the temperature control has become one of the crucial challenges in the design, in the schema constraints, the

operating space increasingly the smaller the case, how to effectively take away the heat generated by the larger unit power? the

MAP series of high thermal conductivity of soft silicone thermal insulation pad is widely used in LED lighting, automotive

electronics, monitors, computers and power supply and other electronic equipment industry .

MAP-05 thermal pad is widely used in the Floodlights heating device and heat sink and chassis of the gap filler material. The

material soft and flexible variables, the low pressure lighting device used for the surface of the rough surface structure sealing

contact, reduce air thermal resistance, the use of the inherent thermal properties, and meet the process heat transfer

requirements of the devices. devices use the power to enhance and extend the service life; 150 hours in the high temperature 160

℃ under the conditions of continuous testing, performance and stability; apply to cast light ceiling light, wall lights LED

garden lights LED fuse lights, LED Pixel Light LED Underwater Lamp LED Waterproof Spotlights LED PAR lamp LED lights Cup Series

LED High Power Light Cup Series. LED advertising fonts lamp with aluminum plate to meet the demand for heat lamps. Soft thermal

conductivity of silicone insulation pad of heat transfer in the interface material is a sheet material can be cut according to the

size and shape of the heating power devices, with good thermal conductivity and insulating properties, and its role to fill the

heating power devices The gap between the heat sink is the ideal product to replace the thermal grease.

Thermal conductivity of materials used in the heat, many manufacturers still been using thermal grease as a thermal filler

material. According to my understanding of the thermal grease: the thermal conductivity of the thermal conductivity of silicon

paste is generally good, but relatively poor insulation, and The most serious is that easy to aging in some of the work

environment, too much trouble to use, easy to stain peripheral devices, cause a short circuit. General fear most is the aging

problem, which affects the life of high-power LED lamps, high power LED life is 50,000 hours, equivalent to more than five years,

but if the thermal grease used as a thermal conductivity filler material lamps working hours, slowly inside the main component of

silicone oil evaporation, and finally dry, its thermal conductivity is greatly reduced, will affect the normal cooling of the

lamps when the life of the lamp followed by impact.

Posted in Uncategorized | Tagged , , | Comments Off

carbon dioxide degradable plastic industrialization encountered three major problems

Posted on February 15, 2012 by admin

Web Design And Seo For www.china-webdesign.com
zipper attachment machine – China Manufacturer
Thank you for inquiry my zipper attachment machine, Tel:+86-0577-65622138, Email:xinxin@xinxinpack.com
http://www.bagsmakingmachine.com/

As one of the chemically fixed in the direction of carbon dioxide, carbon dioxide system, plastic, carbon capture, storage and use of great significance. The one hand, the carbon dioxide system of plastic can replace traditional plastics in many areas, thereby reducing carbon emissions in the process of production of traditional plastics; the other hand, the production of one ton of resin consumption of 0.4-0.5 tons of carbon dioxide, also reflects the carbon dioxide utilization economic value. Plastic and carbon dioxide enhanced oil recovery (CO2-EOR) is similar to reducing CO2 emissions at the same time, revenue for the enterprise.
Insiders said that China in this area of ??the carbon dioxide system of plastic has a breakthrough, but for various reasons, the domestic carbon dioxide degradable plastic industry has been slow progress, the use of related technologies, only CNOOC "high-end players" only " play in this game ".
First, cost too much pressure. China s successful development of carbon dioxide degradable plastics are mainly four kinds of these four kinds of technology, there are three kinds of industrialization. Due to the small scale of these projects, only small batch production, low yield, expensive. In addition, the project required one of the main raw material for propylene oxide and epichlorohydrin price is also high, coupled with new products and promotion expenses in a lot of money, leading to the final cost of the carbon dioxide degradable plastics up to 18,000 yuan / ton. In the case of oil-based plastics prices with falling oil prices, carbon dioxide degradable plastics companies the cost of increasing pressure.
Second, the investment risk. Investment per unit of product, carbon dioxide degradable plastics project investment than the CTL is high, a 10,000 t / year of carbon dioxide degradable plastic items often require capital investment of more than 140 million yuan, a single from the economic benefits to consider. The investment risk of the project. Guangzhou natural biodegradable materials Co., Ltd. Project Manager Lu Bin. BlueChemical AG and Inner Mongolia Mengxi High-tech Group, also admits that the carbon dioxide degradable plastic items do not make money or even lose money if you do not calculate the energy saving and environmental benefits.

Posted in Uncategorized | Tagged , | Comments Off

next year, the global LED lighting market penetration will exceed 10%

Posted on February 14, 2012 by admin

Web Design And Seo For www.china-webdesign.com
led garden lighting – China Manufacturer
Thank you for inquiry my led garden lighting, Tel:+86-574-87641051 E-MAIL:sales@everlightings.com
http://www.everlites.com/key-led-garden-lighting-30/

   Zhongzheng Wang News Market participants pointed out, following the LED TV, LED lighting will become a fast-growing applications to drive the LED industry. DIGITIMES Research the latest statistics, the size of the high-brightness LED market will be $ 8.25 billion in 2010, growing to $ 12.6 billion in 2011, the annual growth rate of up to 53%, which, LED lighting, the number of pieces from 4.8 billion in 2010, will $ 12.4 billion in 2011, mainly because of the 2011 LED bulbs to replace the traditional incandescent began to show effects.

DIGITIMES Research, the 2010 LED lighting of the total lighting market share is not high, only 3.2% of the to the output value point of view, but in rising awareness of carbon reduction, the major countries in the world has set the LED lighting policy to actively promote the LED lighting industry developments. DIGITIMES Research analysis of the global demand for LED bulbs will be 596 million in 2011, substantial growth to 2.5 billion in 2013; street lights, due to the major cities of mainland China, the United States, Europe and other countries to promote the demonstration project is estimated that LED street lights will be 2.2 million in 2011 to $ 9.8 million in 2013, thereby bringing about the next few years, LED lighting penetration upgrade.

DIGITIMES Research believes that in the world\\ s major countries in LED lighting policy to promote the LED luminous efficiency is significantly improved, and estimated the prices of LED lighting every year there will be 20 to 30 percent fell under the influence of DIGITIMES Research, forecast lighting demand for LED 2009 2013 CAGR to reach 97.4 percent, higher than that of large-size LCD with LED backlight CAGR 62.6%, and the LED lighting market size As for 2011 will reach $ 15.4 billion, the overall lighting market penetration for the first time exceeded 10 percent, reaching 10.6% .

Posted in Uncategorized | Tagged , , | Comments Off

understand the working principle of the vacuum relief valve

Posted on February 14, 2012 by admin

Web Design And Seo For www.china-webdesign.com
gate valve manufacturer – China Manufacturer
Thank you for inquiry my gate valve manufacturer, Tel: +86 371 6091 6560E-MAIL:henantaineng@yahoo.cn
http://www.metallurgyvalve.com/Gate-Valve-Series/

   The vacuum relief valve spring and the rod two categories. There are also red type safety valve, pilot safety valve, safety

switching valve, safety release valve, dead weight safety valve. Rely on the spring force of the spring-loaded safety valve and

work there in the spring-loaded safety valve closed and not closed, generally flammable, explosive or toxic media should be used

in closed, steam or inert gas can be selected is not closed type, there are spring-loaded safety valve with a wrench and wrench.

The wrench\\ s main function is to check the valve flap degree of flexibility, and sometimes can also be used manually with

emergency relief.

     How it works:
The safety valve in the system from the security role. When the system pressure exceeds the set value, the safety valve Ting open,

will be part of the system of gas into the atmosphere, so that system pressure does not exceed the allowable value, thus ensuring

the system is not an accident due to the pressure is too high. Safety valve, also known as the relief valve. Icon for some of the

typical structure of the safety valve. Figure a piston valve spool is a tablet. Gas source pressure on the piston A, when the

pressure exceeds the safe value determined by the spring force, the piston A was to open the top part of the compressed air into

the atmosphere from the valve port; when air pressure falls below a safe value, the spring-driven piston down, close the valve

port.

Posted in Uncategorized | Tagged , , | Comments Off